Weight with basic equipment |
14 700 kg |
Fuel tank |
330 Litres |
|
Engine
Engine |
Cummins, 6 cylinder, Turbo charger, Intercooler, Electronically governed injection. |
Capacity (liters) |
6,7 |
Torque (Nm) at rpm |
949/1400 |
Power output kW (HP) at rpm |
164(220)/2000 |
Other |
Two separate, electronically adjustable constant-speeds automatically actuated, EC stage-3 approved. |
Transmission
Tractive force net |
More than 12 tons. |
Hydrostatic drive |
Computer controlled capacity control. Tank completely separated from the working hydraulics. Synthetic oil. |
Gearbox |
Power-Shift 2-steps gearbox. 1th gear 0 -9,1 km/h, 2nd gear 2,0 - 25 km/h. |
Gearwheel bogies |
Cast iron, roller path bearing. |
Differential locks |
Separately controlled with 100 % locking. |
Hub reduction |
On every wheel. |
Steering system |
Servo-steering. Electrical proportional terrain steering in separate lever. |
Steering torque (kNm) |
42 |
Steering angle |
+/- 43° |
Brakes |
Four oil-immersed multiple-disc brakes in front and rear differentials. Parking and emergency brake actuating all multiple-disc brakes and actuated automatically in neutral. |
Other |
Foot pedals for forward/backward and driving speed. Warning system with fault indication in plain text and acustic/optical signal. Fault tracing via computer. |
Hydraulics
Working hydraulics |
Constant pressure/loadsensing system. Own tank completely separated from the hydrostatic hydraulics. Synthetic oil. |
Pump (cc) |
170 Variable, adjustable flow rate limitation via GreControl |
Working pressure (MPa) |
24 |
Other |
Tanks with electrical re-filling device via filter. Thermostat controlled hydraulic fan for the cooling devices of hydrostat and working hydraulics. |
Boom/Boom Control
Boom/Boom Control
Loglift (V) |
181 |
Reach length (m) |
10,0 |
Gross lifting torque (kNm) |
138 |
Other |
IQAN Experience. individual programme storage for 5 operators. |
Electrics
Voltage (V) |
24 |
Lights |
16 st Xenon. |
Generator / Battery |
l75 / 2x750 (maintenance-free) |
Other |
Travel lights according to law. |
Harvester Head/Measuring
Modell |
SP 561 LF with maximum root pruning 60 cm. |
Kvistningsdiameter (cm) |
43 tip-tip |
Roller motors (cc) |
Poclain 514, 560 alternatively 625 |
Other |
The patented construction of the feed roller holder carries the trunk during processing. Automatic chain tensioner SC 100, auto-cut, loghold, quickcut, proportional pressure on pruning knifes and feed rollers adjusted by Dasa4. Dasa4 with large colour screen, loose keyboard and Canbus communication. Prepared for GPS, e-mail etc |
|
|
